In the line of MARPOSS acoustic sensors designed to manage and optimise grinding wheel processing and conditioning on grinding machines, the P7 system’s versatility, processing speed, possible configurations and hardware/software standardisation place it at the top of its category.

Individual process monitoring requirements are completely fulfilled in the in-process measuring packages developed as a result of Marposs experience. The visualization can be made either by a graphic panel display or directly on CNC operator panel by means of MHIS software (Marposs Human Interface Software) developed in Windows® environment

To know more about the Software for Process Monitoring, follow the link:
Process Monitoring Applications on Grinders

Related posts:

1. Grinding Line: Software for Wheel Balancing
2. Grinding Line: Software for Measuring
3. MHIS software to manage: measurement, balancing and analysis

Software packages for integration of Marposs Human Interface inside the machine tool ‘s pc /cnc

The ever increasing possibility of multitasking operation for the CNCs which control grinding machines and the increase in their graphics capacities has allowed Manufacturers to design and develop the user interface to be increasingly ergonomic and specific for machine operators.

As a result, they can view process parameters and at the same time interact with them without compromising machining cycle performance.

The same type of operation is also required of the interface for accessory and control functions (in process measure, grinding wheel balancing, etc.) which are normally performed by installing specific apparatuses on the machine. A growing number of grinding machine manufacturer need and want to create an optimised user interface for their machines, an interface shared by the various functions with the aim of making it simpler for end users.

Another aim is to reduce the space occupied on the Machine Panel by the front panels of the various apparatuses.

Here the software to satisfy the need for INTEGRATION of the user interface as regards the part relative to control functions such as:

* in process measurement

* grinding whell balancing

* analysis using acoustic sensors

Marposs proposes MHIS, a software developed for the Windows?Ç¬Æ 2000/NT/XP environment, able to operate in the machine PC /CNC.

MHIS activates the connection between the machine PC/CNC and the P5/P7 using an RS 232 interface or via Ethernet.

MHIS is also supplied as a software Component (OCX).

Therefore, it can be integrated in the User Interface designed by the machine Manufacturer using Microsoft COM environment rules.

An OPC server is also available. Thanks to the Client – Sever architecture this allows two or more User programs simultaneously active in the PC/CNC to share the data which arrives from the Gauge.

Follow the link to know more about the MHIS Software to manage: measurement, balancing and analysis

Related posts:

1. MHIS – Marposs Human Interface SW
2. Grinding Line: Software for Wheel Balancing
3. Grinding Line: Software for Process Monitoring

MARPOSS supplies a wide range of acoustic sensors for grinding machines, able to satisfy various requirements including continuous monitoring and air gap check, dressing, grinding wheel and part collision.

Follow the link Acoustic Emission Sensors for Grinders to know more

Related posts:

1. Grinding Line: Software for Process Monitoring
2. P3SE – Electronic Monitoring System for Process Control on Grinders
3. Monitoring Applications for Grinders